Waterproofing Sealer has seal, adhere properties. It can be applied over concrete, metal, wood etc. The ideal area for application is metal roofs, parapets, dams, gutters, down pipes, concrete roofs, precast panel walls, glazing etc.
• Fast drying, excellent water resistant property.
• Excellent movement tolerance.
• Stain resistance.
• Impact resistance.
• Cures to form an elastic seal.
• High fire resistance
• Excellent in sealing cracks and joints.
All joints, cracks and surfaces must be sound, clean and dry. Grease, oil, laitance, previous waterproofing or damp proofing materials and other contamination must be thoroughly removed. Cleaning may be done by wire brush or sandblasting. Waterproofing Sealer can be applied by brush, conventional caulking equipment. Ensure that the sealant is firmly filled into the joints or cracks to give the full strength. For shrinkage cracks or cracks that occur more than 2mm wide SEALER mixed with washed sand is recommended. SELFCOAT BIND MUST BE APPLIED BEFORE APPLICATION.
Colour: Wet – Creamy, Dry – Clear/Light Grey
UV resistance: Excellent
Chemical resistance: Excellent
Water resistance: Excellent
Hardening resistance: Excellent
Drying time: 30 min (touch dry) 24 Hours (full cure)
Spreading rate: 12-17 m²/L (depending on substrate)
Use water to clean all the equipment thoroughly after using it.
Store the sealed containers at moderate temperatures.